"large centrifugal fan"

Product Description: The Induced Draft Fan is a crucial component in many industrial processes, particularly those that require ventilation or exhaust systems. This product is capable of moving large volumes of air, with an air volume range of 3000-20000m3/h. The fan comes in various blade numbers, including 4-73, 5-48, 6-51, and 9-19, allowing for flexibility in use and application. The Induced Draft Fan is known for its low noise operation, with a noise level of ≤85dB(A).

Product Description: Our Induced Draft Fan product has been certified by CE and ISO, ensuring that it meets strict quality and safety standards. It is capable of achieving air volumes ranging from 3000 to 20000m3/h, making it suitable for a wide variety of industrial applications. The fan is also available in a range of power ratings, from 5.5 to 1500kW, allowing it to be tailored to the specific needs of each application. One of the key features of our Induced Draft Fan is

Product Description: The 9-19 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling, clinker cooler, circulating fluidized bed system, air purification and industrial waste gas

High Temperature Industrial Air Blower Machine Power Plant Fan Introduction The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. For dusty gas, we can meet all kinds of working conditions from small amount of dust to large amount of dust. After special treatment, the hardness of blade surface can reach HRC60~70,

Product Description: G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can transport clean gas, dusty gas, flammable gas, corrosive gas, powder or granular

7-41 series desulfurization high temperature fan Product description The design structure of the large dust removal fan produced by our company is double suction and double support. The air volume and pressure parameters can be optimized according to the working conditions. It is mainly used in steel, coking, building materials and other industries. Product features 1. Using mature and efficient pneumatic model, the operation of the unit is more energy-saving. 2. Using

ID fan for power plant up to 200MW urea fertilizer ID PA FD fan and FGD boost fan In energy sector we can provide blower and fan for both trandition and renewable energy generation. In a tradition power plant or captive power plant, we provide - Primary air fan (PA Fan); - Forced draught fan (FD Fan); - Induced draught fan (ID Fan); - FGD boost fan; Our blower and fan have been widely applied for the boilers with a capacity from 50 to 2000 t/h or power plant up to 600MW a

Przeciwwybuchowy przemysłowy wentylator ID o wydajności ≥85%, hałasie ≤85dB(A) i przepływie powietrza 3000-20000m3/h. Certyfikat CE/ISO, stopień ochrony IP55 i niestandardowe opcje do wymagających zastosowań chemicznych/cementowych.

Cement plant kiln exhaust blower fan Introduction Of exhaust blower fan The kiln head exhaust fan provides negative pressure for the kiln head dust collector and discharges the dedusted kiln head exhaust gas into the atmosphere. The working temperature of the fan is 180-250°C, and the dust content is less than 50mg/Nm³. The fan adopts a high-efficiency, low-noise, low-noise, and large-flow model. The impeller is an arc-shaped disc with single-plate backward blades, which has