"high temperature fans and blowers"

Long Life Building Ventilation V-Belt Driving Dust Collector Fan Introduction The Long Life Building Ventilation V-Belt Driving Dust Collector Fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50°C (max 80°C), the dust and hard particles contained in the medium is not more than 150 mg / m3.

Carbon Steel Coupling Driven Corrosion Resistant Industrial Boiler FD Blower Fan Introduction 6-04 series fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. They are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow and dust removal ventilation systems in

Q235 Energy Efficiency Antiwear Heat Dissipation Boiler Blower Fan Introduction The 6-06.51 series boiler fan is mainly used for the fan system of the 2t/h~670t/h steam boiler of the thermal power plant, and also meets the requirements of the performance parameters of the high pressure head of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The medium transported by the forced draft fan is air

Industrial Long Lifetime Anti-Explosion Industrial Boiler ID Blower Fan Introduction The 4-09 series large-flow centrifugal fan is the earliest used fan in China, and it is also the most commonly used fan. Suitable for conveying clean air or light materials at normal temperature, most commonly used in industrial furnaces for air supply, light particle/powder/crush/fiber transportation, air drying/cooling of materials, ventilation and smoke exhaust, and other areas. No viscous

Stainless Steel Single Suction CFB Boiler Induced Draft Blower Fan Introduction At present, there are many series of boilers, and the situation of burning coal quality is quite different, after installing dust removal equipment and waste heat utilization equipment, insufficient pumping force affects normal operation. In order to overcome the insufficient pumping force due to the above reasons, the furnace has a positive pressure, which affects the combustion and normal

CFB Boiler Single Inlet Wear Resistant Air Circulation Fan Introduction: This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles. The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the

Forward Coupling Driving Low Pressure Explosion Proof Centrifugal Blower Product Features 1. When the pressure requirement is met, a large gas flow can be output, and the noise is very low. 2. The V-belt drive makes your fan to operate at the optimum speed. Installation is simple and does not require the support of professional technicians. 3. The airflow channel and the impeller are optimized several times, which is more efficient and energy-saving than ordinary large-flow

Alloy Steel Long Life Metallurgy Centrifugal Ventilation Fans Introduction The 7-10 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 87%. It belongs to small flow and medium pressure series. Technical data series model Rotation Speed ( r/min) Total Pressure ( Pa ) Air Capacity ( m³/h ) Power (kW) 7-10 5D 3030 2982 ~ 3456 4486 ~ 8971 11 ~ 15 5.6D 2360 2623 ～ 2264

High Pressure Backward Coupling Driving Furnace Stainless Steel Blower Introduction Of Centrifugal Fan 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder/debris